Mirror Medicine Cabinet Replacement: Intro & Process

Share on facebook
Share on pinterest
Share on email

Looking for a practical and chic way to store things in your bathroom or bedroom? Medicine cabinets with mirrors are an excellent choice. They are functional, providing plenty of storage and adding a modern touch with their reflective surface. The guide will highlight the advantages and process of medicine cabinet mirror replacement. Plus, you’ll get advice on selecting the ideal mirror cabinet for your room.

This detailed guide covers various medicine cabinet styles with mirrors. We’ll look at frameless designs, options for recessed or surface-mounted cabinets, and models with mirrors on both sides.

Related: Easy Bathroom Wall Cabinet Installation & Storage Solutions

Modern bathrooms and bedrooms often use medicine cabinets without frames that include mirrors. These cabinets lack a frame, so the mirror extends over the whole front. They look simple and fit well with various decorating styles.

Their main benefit is the larger mirror area compared to cabinets with frames. Frames use space that the mirror could occupy. Cabinets without frames are also easier to clean because they don’t have small corners where dirt can accumulate.

Frameless Medicine Cabinets with Mirrors

When selecting a mirror for these cabinets, there are a few glass types to consider. The popular choices are copper-free silver mirrors and beveled edge mirrors.

Copper-free silver mirrors: Use special glass with a clear and bright reflection. They are also better for the environment than traditional mirrors that contain copper.

These mirrors stay clear and bright for longer. They don’t discolor or deteriorate quickly.

Mirrors with beveled edges: Have a sloping side. This adds a decorative element. The slope of the bevel can vary, giving the mirror a framed appearance.

Mirrors with beveled edges can enhance the cabinet’s look. They also spread light around the room, making it appear larger.

Installation Tips

You can install these frameless medicine cabinets in various ways. You can put them on the wall, hang them on the wall, or use a mix of both methods. Each installation type suits different room layouts and designs.

Recessed medicine cabinets with mirrors fit inside the wall. This creates a neat, flush look in the bathroom. They are great for saving space and look good too.

A vital benefit of these cabinets is how they save space. By fitting into the wall, they don’t stick out and use floor space. It is beneficial in small bathrooms.

Recessed Medicine Cabinets with Mirrors

Installation Tips

Installing a recessed medicine cabinet involves cutting a hole in the wall and securing the cabinet. Make sure to measure correctly so it fits well. This installation takes more effort than surface-mount cabinets, but the result is worth it.

Design Choices

When choosing one of these cabinets, consider the depth. It should not go too far into the wall. Pick a cabinet that matches your bathroom’s style and meets your storage needs.

Surface-mount medicine cabinets with mirrors are meant to be mounted on the wall’s surface, not inside it. They are great for larger bathrooms or places where recessed cabinets won’t work.

They are easy to install, as you don’t need to cut into the wall; therefore, they are ideal for renters or anyone who doesn’t want a big renovation project.

Installation Tips

Putting up a surface-mount cabinet involves attaching it to the wall with screws or adhesive. A strong mounting method is essential to keep the cabinet firmly in place. Some cabinets come with a mounting bracket for extra support.

Style and Design Options

There are many styles and designs of surface-mount cabinets. You can choose from traditional, modern, or transitional styles, and different finishes like chrome, brushed nickel, or oil-rubbed bronze. Many cabinets also have special features such as beveled edges or decorative molding.

Definition and Benefits Double-sided mirror medicine cabinets have mirrors on both the front and back of the door. They offer more mirror space and are great for shared bathrooms or spaces many people use at once.

They offer a larger mirror surface, letting you see yourself from different angles, which helps apply makeup or style your hair.

Multi-door medicine cabinets with mirrors have several doors, each opening to its own storage space. They’re perfect for larger bathrooms or many people sharing a space.

The main advantage is the large storage space for different users. Everyone can have their own area, making organizing and finding your items easier.

Multi-Door Medicine Cabinets with Mirrors

Number of Doors

You can find these cabinets with two, three, or even four doors, based on how much storage you need. Two-door models are suitable for smaller bathrooms, while three or four-door models are better for larger spaces or more users.

Adjustable Shelves

These cabinets often have shelves you can move. This lets you fit in different-sized items, like tall bottles.

Soft-Closing Doors

Many of these cabinets have doors that close gently and quietly. This helps prevent damage and keeps the bathroom quieter.


  • Drill With Bits
  • 6-in Drywall Taping Knife
  • Hammer
  • Screwdrivers
  • Heat Gun


  • Medicine Cabinet
  • Vanity Light
  • Surface-Mount Wall Mirror
  • Mirror Mounting Clips
  • Adhesive Suitable for Mirrors

1. Prepare the Mirror

Cover the mirror with heavy-duty packing tape. This helps prevent the glass from cracking or shattering.

Remove a Surface-Mount Mirror of cabinet

2. Loosen the Mirror

Insert wooden shims between the mirror and the wall. Tap them in carefully with a hammer. Don’t push too hard under the glass.


You can use a heat gun to soften the glue.

3. Start Removing the Mirror

Place a shim under your pry bar to protect the wall. Gently start prying the mirror off. Keep the pressure steady and listen for the sound of drywall paper tearing. It’s fine if the paper tears. Work along the top and sides, releasing a bit at a time.

4. Support the Mirror

As you reach the bottom, have someone hold the top to prevent it from falling.

5. Remove the Mirror Safely

Once the mirror is loose, carefully take it out of the bathroom. If you want to use the mirror again, handle it carefully to avoid damage.

6. Repair the Drywall

Remove any adhesive on the drywall with a putty knife. Score a circle around the damaged area with a utility knife and peel off loose drywall paper inside the circle, to help prepare the area for patching and help the patch blend in.

7. Prepare the Area for Patching

Sand around the scored area. Apply a light coat of primer to the damaged spot, let it dry, and then sand it smooth. Be careful not to soak the exposed gypsum.

8. Patch the Drywall

Use a 6-inch drywall taping knife to apply several thin layers of drywall patch, allowing each to dry before adding the next. Sand the patched area until it’s smooth with the wall. Apply a coat of primer to the patch. Now, you’re ready to paint the patched area and the rest of the wall.

Before installing the mirror, mark its position on the wall. You can use a pencil, painter’s tape, or a cardboard cutout of the mirror’s shape. This helps you adjust the placement easily.

Remember, mirrors can be heavy, so get help for support and movement.

Install a Surface-Mount Mirror with Adhesive

1. Set Up a Temporary Support

To hold the mirror while the adhesive sets, attach a straight piece of scrap wood to the wall. Align the wood’s top edge with where the mirror’s bottom will be. If the wall is tiled or can’t be screwed into, and there’s a vanity below, measure from the vanity top to the mirror’s bottom edge. Then, cut spacers to that length and rest them on the vanity.

2. Apply Adhesive

Put evenly spaced spirals of mirror adhesive on the mirror’s back, following the manufacturer’s instructions. Don’t use general construction adhesive. It would help if you had a specific type that won’t harm the mirror’s reflective coating.

3. Mount the Mirror

Start by placing the mirror’s bottom edge against the wall. Then, tilt the top up to the wall and press gently but firmly. It’s good to have someone help you. Use painter’s tape at the mirror’s top to keep it in place while the adhesive dries.

4. Final Steps

After the adhesive dries, remove the support board. Patch any holes, sand them smooth, prime, and paint.

Remember, mirrors can be heavy, so it’s important to have help for support and moving it.

1. Remove the Mirror

Carefully lift the mirror off the wall. If it’s held by metal clips, lift it upwards first, then angle it out from the bottom to detach it.

2. Remove the Screws

Next, remove the screws from the cleat or clips that are attached to the wall.

3. Repair the Wall

If the wall has any damage, like holes or marks, repair it. First, sand the area until it’s smooth. Then, apply primer and paint over it once it’s dry to leave the wall looking clean and undamaged.

Install a Surface-Mount Mirror with Screws

First, decide where to place the mirror. You can mark its position on the wall using a pencil, painter’s tape, or a cardboard cutout matching the mirror’s size. These methods help you adjust the placement as needed. Remember, mirrors can be heavy, so get assistance for support and movement.

1. Position and Mark the Mirror

If your mirror comes with cleats (which make hanging easier), hold it against the wall in the desired position. Then, mark the wall where the mirror will go.

2. Prepare for Cleat Installation

Put the mirror aside. Use your earlier markings to determine where the cleat will go on the wall.

3. Drill and Install the Cleat

Drill holes at the marked spots. If the holes don’t align with wall studs, use wall anchors for support. Then, secure the cleat to the wall using screws.

4. Hang the Mirror

Finally, hang the mirror on the cleat. Adjust its position if needed to ensure it’s properly aligned and secure.

To remove a surface-mount mirrored medicine cabinet, which is attached directly to the wall, follow these steps. Remember, these cabinets can be heavy, so it’s essential to have assistance for support and moving.

1. Remove the Shelves

First, remove all the shelves from the cabinet to reduce the weight and make it easier to handle.

2. Unscrew the Cabinet

While someone helps support the cabinet, carefully unscrew the mounting screws. These screws hold the cabinet to the wall. Make sure to support the cabinet’s weight as you loosen the screws to prevent it from falling.

3. Repair the Wall

Once you’ve removed the cabinet, check the wall for any damage. If you find holes or other marks, you’ll need to patch them up. Start by sanding the area until it’s smooth. Then, apply a coat of primer. After the primer dries, you can paint over the area. This will restore the wall to its original condition.

Install a Mirrored Cabinet

Installing a surface-mount mirrored cabinet involves careful positioning and secure attachment to the wall. Since medicine cabinets can be heavy, it’s essential to have assistance to help with support and movement.

1. Position and Mark the Cabinet

First, decide where you want to place the cabinet. You can use a pencil, painter’s tape, or a cardboard cutout to mark the outline on the wall. Hold the cabinet against the wall in the desired position, ensuring it’s level. Then, mark where the mounting holes on the cabinet align with the wall.

After marking, set the cabinet aside.

2. Prepare the Wall for Mounting

At the marked spots, drill pilot holes. If your pilot holes do not align with wall studs, use wall anchors. Wall anchors will support the cabinet’s weight, especially if not anchored into a stud. Insert the wall anchors firmly into the pilot holes.

Once these preparations are complete, you’re ready to secure the cabinet to the wall, ensuring it’s properly aligned and stable.

1. Remove all the shelves to make the cabinet lighter.

2. Unscrew the mounting screws and carefully pull the cabinet from the wall. Get help to support the cabinet’s weight.

3. If you’re not installing a new cabinet, repair the drywall. Cut the existing drywall over the 2×4 framing to expose half of each stud.

4. Cut a new drywall piece to fit the hole. Attach it to the studs with drywall screws.

5. Sand the seams to smooth any rough edges.

6. Apply joint compound and drywall tape as instructed. Usually, this involves a thin compound layer, applying tape, and letting it dry. After sanding it smooth, apply another compound layer, extend it beyond the first layer’s edges, and let it dry. Sand again. If needed, apply a third compound layer, let it dry, and sand smooth.

7. Prime and paint the repaired area and, if necessary, the rest of the wall.

1. Outline the Cabinet

Hold the cabinet against the wall and trace its outline.Hold the cabinet against the wall and trace its outline.

2. Check for Plumbing or Electrical Issues

Use a stud finder to locate studs and mark them. Drive a screw partway into the wall inside the outline, but away from a stud. Cut a small hole around this screw and remove the wall piece. Use a flashlight to check for any electrical wires or plumbing. If you find any, consider hiring a professional to reroute them.

3. Cut the Opening

Cut along the traced outline. If there are studs in the way, cut them too. Be mindful of the wall on the other side. Use a reciprocating saw or hand saw. If the other room’s wall is screwed to the studs, cut the screws on the backside of the stud with a mini-hacksaw.

4. Create the Frame Inside the Recess

Measure the space between studs and cut 2-by-4s to fit. Tip: Trim about 1 inch off the 2-by-4s for easier positioning. Apply adhesive to the ends of these 2-by-4s, set them in place, and screw them through the drywall. Toenail screws through the 2-by-4s into the existing studs. Then, cut 2-by-4s for the sides, hold them in place, and screw them through the drywall.

5. Patch and Prepare the Area

Cover the screw heads with joint compound. Let it dry and sand it smooth. Prime and paint if necessary.

6. Fit the Cabinet

Place the cabinet in the hole. Ensure the door can open without hitting the wall. Mark where the mounting holes are, remove the cabinet, and drill pilot holes at these marks.

7. Secure the Cabinet

Put the cabinet back in the hole and fasten it with screws. Install the shelves.


Get Our Latest Designs And Quotes